- Bare Metal
- Galvanised Iron
- Wrought Iron
For a high build zinc coating that goes on like silk
This zinc-rich, heavy duty metal primer is the ultimate in metal protection for iron and steel surfaces. For larger surface areas, Zinc Guard™ Cold Galvanising Coating is the best way protect metal from corrosion and prevent rust.
Zinc Guard™ Cold Galvanising Coating is essential for use in protecting surfaces around
Preparation: Surface should be clean, dry and free from oil and grease. Zinc Guard™ Cold Galvanising Coating should only be applied to clean, bare metal that has been abraded to AS1627.4 Class 2. Correct surface preparation will improve the level of corrosion protection.
Application: The product can be applied with brush, roller or spray (airless or conventional). Stir the can thoroughly until the product is uniform with a flat stirrer. Continue mixing frequently during use. Brush/Roller – Apply even coats of the mixed material to the prepared surface. Thin if necessary for ease of application (Maximum of 5% Dy-Mark Xylene Specialty Thinner). When brushing/rolling additional coats may be required to achieve desired thickness. Conventional Spraying – Agitate paint pot regularly to avoid settling of the product. Thin the product with 15-20% Dy-Mark Xylene Specialty Thinner and apply at the pressure of 40-60 psi.
Handy Tip: Ideal application temperature is between 10˚C and 40˚C.
Handy Tip: Clean brushes & equipment with Mineral Turps or Dy-Mark Xylene Specialty Thinner.
